With just a glance down the hallway, an SSC series hallway sign provides highly-visible indication of a room’s availability as part of a complete Crestron® enterprise room scheduling solution. Its stylish appearance and vivid color illumination complement any corporate office environment. The two-sided, clear acrylic sign face glows bright green or red to indicate room availability. The sign face is custom engravable with the room number, name, icon, or other designation. The complete sign assembly mounts to a cutout in a drywall or drop-tile ceiling.
Enhanced Legibility
The SSC-100-EL & SSC-102-EL hallway signs provides a clear indication of a room’s availability with enhanced contrast and visibility as part of a complete Crestron® enterprise room scheduling solution.
Room Availability Status
For room scheduling applications, the SSC simply connects via USB to a Crestron TSS-7 , TSS-10 , TSW-760 , TSW-760-NC , TSW-1060 , or TSW-1060-NC series touch screen. No special programming or configuration is required. The sign color is controlled by the room scheduling application, which runs on the touch screen and syncs with Crestron Fusion® or another room scheduling service. The sign illuminates green when the room is available and red when the room is occupied.
Custom RGB Colors
For custom applications, the SSC can be integrated with a Crestron control system and programmed to illuminate in a wide variety of colors. Its RGB LEDs can be controlled in 10% increments per color. When powered by USB, any single color LED can be used at full brightness, while if connected via Cresnet two color LEDs can be used at full brightness simultaneously. Three color mixing is possible when powered by Cresnet if each LED is limited to 70%. The control system can be programmed to support all types of functionality, enabling colors to alternate, fade in and out, or blink on and off as desired. Control system integration can be accomplished through a USB connection to a TSW-760(-NC) or TSW-1060(-NC) series touch screen, or through a Cresnet® connection to the control system.
Custom Engraving
The SSC is available with or without custom engraving. The engraving appears on both sides of the acrylic sign face to identify the room by name, number, or a representative icon image. When illuminated, the engraving is clearly visible at a distance of 50 feet or 15 meters. Engraving can be changed at any time by purchasing a replacement sign face (model SSC-ACR-100 or SSC-ACR-102 ). Specifying the engraving is facilitated using Crestron Studio® software.
Simple Installation
Installing the SSC is simple. It mounts to a drywall or drop-tile ceiling through a 2 x 10.4 inch (51 x 264 mm) cutout using four swiveling dogs integrated into the unit. Power and communications are supplied by a single USB or Cresnet wire. A fifteen foot (4.57 meter) plenum-rated USB cable is included, which connects to the touch screen mounted below. Alternately, a Cresnet cable (sold separately) can be run to a control system up to 3000 feet (914 meters) away. Cresnet allows for daisy-chaining multiple hallway signs using a single cable.
Key Features
Signage | |
Material | Acrylic, two sided |
Engraving | One or two lines per side with same text or graphical icon on each side |
Illumination | Edgelit RGB LED |
Functionality | Supports alternating red/green indication of room availability status when connected to a room scheduling touch screen via USB, supports custom RGB color mixing when connected to a control system |
Communications | |
USB | USB 2.0 device for connection to a TSS-7, TSS-10, TSW-760, TSW-760-NC, TSW-1060, or TSW-1060-NC series touch screen |
Cresnet | Cresnet® network slave mode |
Connectors | |
CNET | (1) 4-pin 3.5 mm detachable terminal block; Cresnet slave port |
USB | (1) micro USB Type B connector, female; USB 2.0 device port; Plenum-rated 15 ft (4.57 m) micro B male to A male USB cable included |
Controls | |
CNET ID | (1) Push button (behind bezel) for Cresnet TSID (touch-settable ID) |
Power | |
USB | 2.4 W @ 5 V USB power |
Cresnet Power Usage | 2.4 W @ 24 VDC |
Environmental | |
Temperature | 41 to 113 °F (5 to 45 °C) |
Humidity | 10% to 90% RH (noncondensing) |
Heat Dissipation | 8 BTU/hr |
Construction | |
Composition | Metal bracket with replaceable gray acrylic sign face and magnetically-held white plastic bezel |
Mounting | Flush ceiling mount using 4 integral swiveling dogs; 2.0 in. x 10.4 in. (51 mm x 264 mm) recommended cutout; 1.5 in. (39 mm) minimum mounting depth using USB; 2.5 in. (64 mm) minimum mounting depth using Cresnet; 0.3 in. (8 mm) minimum surface thickness; 0.8 in. (20 mm) maximum surface thickness |
Dimensions | |
Height | 6.63 in. (169 mm) |
Width | 2.82 in. (72 mm) |
Depth | 11.11 in. (282 mm) |
Projects 5.18 in. (132 mm) below the ceiling surface | |
Weight | |
1.5 lb (680 g) | |
Compliance | |
UL® Listed for US & Canada, IC, FCC Part 15 Class B digital device |